[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 1/12/06 5:57:16 PM Eastern Standard Time,
mikes_type_3s_and_4s@yahoo.com writes:
<< My clutch pedal has been laying on the floor
(towards the back of the car) along with the brake
since I got it due to a 3" diamiter hole underneath it
where the stop should be. I got back in and went to
pick the clutch back up and it was not there. It had
come to rest up against the fire wall, and can move
freely back and forth with no friction. >>
It sounds like the cable fell off the hook. What you'll need to do is remove
the pedal cluster, and release the cable from the clutch arm (at the trans),
then fish the cable out so you can re-hook the end back on. Use a zip tie,
bread tie, or something like that to hold it on and in place, and reinstall the
pedal cluster. Then attach the cable end back on the clutch arm (at the trans)
and adjust. You might want to do this after you get your new floors in. I hope
this helps.
Bob 65 Notch S w/ Sunroof and IRS
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977 and now awaiting a 2.0L t-4 engine
transplant, finally have the needed parts : )
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~