[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Guys, I've been slowly working on the FI conversion of my 71 Square (from
carbs), but I've run into a slight problem. I get a click of the relay under the
rear seat, but no click under the dash. I've verified continuity on the wires
from the under rear seat relay to the front, and verified continuity of the
one wire in the engine compartment (grounding this wire does make the pump run
too). I've also verified the relay is good, by swapping places with the one
under the rear seat (they're the relay numbers). I've got power to the front
relay from the fuse box, but can't get this one to click and energize the pump.
What am I missing? I'm working with my T-3 Bentley, and a copy of the T-4 wiring
diagram from Russ's site (they're vertually identical). Any help would be
really appreciated.
Bob 65 Notch S w/ Sunroof and IRS
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977 and now awaiting a 2.0L t-4 engine
transplant, finally have the needed parts : )
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~