[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
There are said to be generic bump-stop mounts available from flaps eg. I formed a suitable shape with an M12 bolt plus washers, a nut or two and a bit of filler paste (bondo) to profile it to suit, then drilled and bolted it on the support. Some people would weld on one from another car. Lots of choices. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Constantino Tobio" <ctobio@gmail.com> To: <type3@vwtype3.org> Sent: Sunday, February 19, 2006 1:43 PM Subject: Re: [T3] rubber bumper things... > Stephen Jackson wrote: > > > > > Those bump stops pop on, rot off. You can get them from > > aircooled.net, I think. I got some for mine a while back although it > > still does not drive, that is one less thing to put on when it does! > > I'm missing the bump stop on the passenger side rear, and the left one's > pretty cracked, too. If the bump stop attaches to a mushroom-shaped > mounting piece, the one on the right side must have rotted off. Is this > how it mounts? > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > >