[T3] Oil pressure/temperature installation

[Dave Sanderson <porschedave@rennlist.net>]

<x-flowed>Hi All

Matt and I want to install both an oil pressure and an oil  
temperature gage to the Notch, adding to the idiot light. At the Cal  
Import site I see that there appear to be a variety of installations  
possibilities, including what appears to be a t-connector that would  
allow me to use two sending units in one location, on top of the oil  
cooler. The temperature switch appears to have a 14 mm thread while  
the oil pressure sending unit is a 10 mm thread and it looks like the  
t-unit will support both. For those of you who have made this  
additional installation, is there a preference? Any experience would  
be appreciated. Thanks in advance.

Dave


David Sanderson, PCA-CWR Past President, Secretary, Editor... just past
(604) 822 - 4361 or (604) 255 - 4935 voice
(604) 822 - 6842 fax
porschedave@rennlist.net
1977 911S 3.0 L
1965 Sunroof Notch
1965 Electric Lime Green Notch
http://members.rennlist.com/porschedave/
http://www3.telus.net/SUDAMA


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>