Re: [T3] Radius Arm

["William Bold" <wtbold@hotmail.com>]

<x-flowed>I believe it's counter-sunk-head.
----- Original Message ----- 
From: "Mike Fisher" <fisherfarms@uwol.net>
To: <type3@vwtype3.org>
Sent: Sunday, August 06, 2006 8:18 PM
Subject: Re: [T3] Radius Arm


> csk head means hex (6 sided) head or slotted screw head or what?
> ----- Original Message ----- 
> From: "Dave Hall" <dave@hallvw.clara.co.uk>
> To: <type3@vwtype3.org>
> Sent: Sunday, August 06, 2006 5:26 PM
> Subject: Re: [T3] Radius Arm
>
>
> > Easily.  Use any small screw and nut you have, preferably one with a csk 
> > head.
> > I assume you have a welder.
> >
> > Dave.
> > UK VW Type 3 & 4 Club
> > http://www.hallvw.clara.co.uk/
> > ------
> > ----- Original Message ----- 
> > From: "Mike Fisher" <fisherfarms@uwol.net>
> > To: <type3@vwtype3.org>
> > Sent: Sunday, August 06, 2006 9:26 PM
> > Subject: [T3] Radius Arm
> >
> >
> > > I've been trying to get the round access plate loose so I don't have to 
> > > pull
> > > my rear fender.  The stud is turning with the 8mm nut.  I thought about
> > > grinding the nut off but I will probably ruin the stud anyway.  Could I 
> > > weld
> > > a new stud to this access plate after grinding it off?  Mike Fisher
> > > Harrisburg, OR
> > >
> > >
> > >
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.394 / Virus Database: 268.10.7/410 - Release Date: 8/5/2006

</x-flowed>