Re: [T3] Crate is running!

["Keith Park" <topnotch@nycap.rr.com>]

This sounds like a good idea, I did get all the passages clear with some
work but those little check balls stuck in place probably by a little
remaining varnish when the carbs dried out completely after rebuilding.\

Keith


> Keith, if you are having problems with clearing the
> carb's passages try using a sonic cleaner on the carb.
> I have been using one for about a year and have had
> very good luck with it clearing the small passages, of
> course take it apart and put it in the sonic cleaner
> in pieces.  I put mine through the acid soak first
> then rinse them in water, then put them in the sonic
> cleaner for about thirty minutes, then blow dry them
> with high pressure air, you should see what comes out
> of them even after they have been in the acid bath. So
> far all that I have cleaned in the sonic cleaner has
> worked like new. Phil
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>