Re: [T3] Swing axle bearing seals

[Parker-Durost <ginpete@xprt.net>]

<x-flowed>I had leaks like this too after swapping trannies right before leaving 
for Parma.  It turned out that I was folding over the inner seal lip 
(with energizer) during assembly.  The solution is to slide the large 
steel spacer in the seal before sliding on the cover.  Check our 
archives from August 2002 for "motor in (axle leak)"

Peter Parker
'66 Square; Phillip
Portland, OR

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>