[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2005-05-20 at 21:13, Toby Erkson wrote: > I bought a pressure gauge (0-60psi, +/- 3%/2%/3%) and gotta get the > right hose and fittings for it so I can check fuel pressure. The > Bentley wasn't clear on how to attach the fuel pressure tester. After > removing the cap (bolt?) does the gauge hose screw on to the fuel line > tap or does it require a hose clamp to keep the hose attached? And what > size hose should I use? Any additional info would be appreciated. Thanks! It needs a hose clamp. If you want to know the accuracy of the gage, send it to me and I can check it against the "Bureau of Standards" 0-60 is a good choice for our use, as you will be operating in the middle of its range. (the most accurate) -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~