[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 May 2005 at 21:16, Constantino Tobio wrote: > Russ Wolfe wrote: > >domestic part number is 7395 and put half the shims in the middle of the > >pulley. > Digging up some info from my former life selling auto parts... > > The part number 7395 would be a Gates or Dayco part number. Not sure > what Goodyear's equivalent would be. > > By the way, the part number is translated as follows > > 7- #7 size belt, I forget how wide the sizes were. Common were 7, 8, and > 9, increasing in thickness. > 395- 39.5 inches, which is, uh, 1000mm or 1m. 1m = 39.37" but maybe .5 is as close as they try to get. > The T1 belt is a 7355 according to one parts guide, which would make it > 4 inches shorter in total length. I would have thought the T1 belt to be > much shorter, since the crank pulley is smaller I think the genny is > closer to the crank. I thought the beetle belt was 1007 or 1008mm, but there were probably different belts for different era beetles. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~