[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] Brake bleeding and other hydraulics
<x-flowed>Do yourself, and the bleed screws, a favor and use a 6 point wrench
on the bleeders. If they are stuck using the two points of an open
wrench can easily round off the screw.
I think they are 6 or 7mm, but I'm not positive.
Use a good release compound like PB Blaster, Liquid Wrench is
lower on my list, but way above WD-40.
Jeff '67 SQbk
Constantino Tobio wrote:
I am terrified that I'm going to snap off the bleeder screws- even
though I've only done this once in my entire life.
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.9 - Release Date: 5/12/05
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
</x-flowed>