[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 2005-03-30 at 18:35, Russ Wolfe wrote: > On Wed, 2005-03-30 at 16:03, John Jaranson wrote: > > I am putting Sophy's rear end back together and the seal/gasket sets > > that I picked up for the wheel end of the swingaxle tubes each have two > > (2) paper gaskets in the kit. All the pictures in my Bentley and > > Haynes show a single paper gasket between the bearing cover and the > > backing plate. Along with the o-rings and other bits in there. > > > > Where does the second paper gasket go? > > > Between the backing plate and the axle tube. Does your have the big oring around the bearing?? If so, you don't need the one behind the backing plate. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~