[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Mar 2005 at 18:22, Russ Wolfe wrote: > On Tue, 2005-03-22 at 16:30, Daryl Koch wrote: > > I just checked the exposed ends of the #1 exhaust vs. the #2 pushrods. The > > #2 is inside of the valve cover mounting surface & the #1 is outside of the > > same surface. > > > I sounds like you either have a bent valve, or something is caught under > the head of the valve. > Is this car carberated, or fuel injection?? > If it is carbed, look into the throat of the carbs and see if they both > look the same. Like maybe an accelerator pump nozzle missing. I had the impression that he told us that the back ends of the valves were all at about the same height, but that the difference was in the pushrods. Which is it? -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~