[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You mention the grommets, and I assume you have unbolted both ends (that T-connection in the back is very tight!). There are also some metal tabs that hold the line firmly against the floorpan, including under the rear seat. Bend these up carefully. Then the line will be free to move. Easier to remove by sliding out the front of the car. You will also want the driver seat removed (assume LHD here...) Are you replacing it with one of Jim A.'s stainless steel lines? Mark Fuhriman '69 Fastback -----Original Message----- From: Nico teWinkel <nico@mulberrylane.net> Sent: Jun 5, 2005 5:45 PM I've unscrewed both ends of the line, popped loose the rubber thingies that plug the holes, then went 'tug!' but nothing happened. It seems to be clipped somewhere beyond where I can see or feel. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~