[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2005-06-03 at 17:11, Carrie wrote: > Actually, I would love that. I have one more issue with this beam and the > '69 is what I need to see (split year front end 68/69, yes, this is > Frankencar). > > On the bottom torsion/trailing arms on both sides the stabilizer bar(s) are > held in with grub screws and some kind of retainer cap. > On the top there is a grub screw on the drivers side (per the workshop > manual) and a smaller threaded hole where I would expect to see a grub screw > on the passenger side. It looks like a short bolt goes in there, (per the > workshop manual) but I'm not clear on what holds the stabilizer bar in place > on either end on top. It looks like I'm missing retainer clips/plugs or > something else. > See if there is anything there that helps. http://classicvw.org/gallery/Frontend If you need more, I can go get mor pictures. I took those because someone was interested in buying it. You might say that is a virgin '69. Never been touched, until I started pulling it. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~