[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 6/2/05 8:39:44 PM Eastern Daylight Time,
kguarnotta@usa.net writes:
<< 'm planning on sandblasting or wire brushing the bottom of my bus, and then
was going to go over the metal with rust-bullet. Any thoughts on that
product for this application? >>
Kevin, you might want to use Master Series that's sold on the Samba or you
can go here ;http://www.masterseriesct.com/ . The guy selling it IS located in
Mass, and it's actually cheaper than Por 15 or equal to Rust bullet in pricing.
Master Series paint is used on bridges thru-out the US, and that's going to
be my next test sample experiment. You still have to go thru the same steps
required of both to use it, so you're not really gaining anything that way. The
Por works good IF you properly prep it, otherwise you get the results that
Keith got. I know, as I've got several different types of samples around here,
including a utility trailer, :O and a formerly rusted out 76 bug, that I sold to
a buddy (so I can keep getting feed back on how the POR is doing). I hope
this helps.
Bob 65 Notch S w/ Sunroof
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~