[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Sorta... we have one at work but by the time I get it set up... and the insert I still have is a very loose fit in the tube so I couldnt open it up anyway. Looks like Russ may have one for me anyway. Ill have to keep an eye out for the good ones at the swaps... I had one and used it in the left box, but I still have to do the right. Thanks, Keith > On 28 Jul 2005 at 21:12, Keith Park wrote: > > > I need one of the weld on inserts... one of AT LEAST 1.05" ID I have one > > here that is a very loose fit and necks it down to .98" and thats just too > > much for me. Anyone have one of the ones thats a nice tight fit with a very > > thin guide sleeve? > > Got access to a lathe? It's easy to open them up. I've made a few of them from > scratch, but it takes a lot of time. > -- > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >