Re: [T3] Type 4 body parts needed.

[Jens Vagelpohl <jens@type4.org>]

<x-flowed>
On Feb 25, 2005, at 16:33, Jim Adney wrote:

> On 25 Feb 2005 at 10:49, Jens Vagelpohl wrote:
>
> > OK, I'm getting confused here. What interchange are we talking about?
> > Interchanging taillight housings between 411 and 412 (no, not 
> > possible)
> > or between sedan and wagon (no, not possible) or between different
> > country spec cars (yes, possible, with caveats)?
>
> It realy started when I asked what I would need to replace the RR 
> fender and
> taillight on a '72 4 door type 4 fastback sedan.

Just looked into my parts book and for the 411 it actually does show 
the same taillight bulb holders and lenses for wagons and sedans. There 
are two versions listed, one used until 7/69 and one used from 8/69 up. 
 However, those listed for M 553 (US spec) do not seem to have this 
distinction, probably because they only started selling them in the US 
in spring 1970.

So basically, you can use any 411 sedan or wagon taillights that you 
can find in the US...

jens

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>