[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Feb 2005 at 9:52, fess wrote: > On Feb 23, 2005, at 8:56 PM, Jim Adney wrote: > > > On 23 Feb 2005 at 21:43, Jim Adney wrote: > > > >> If you then reconnect the DF wire, how much voltage do you get at > >> med/high rpm? > > > > I should have added that this test should be done WITHOUT shorting > > anything. > I do have the charging FAQ. > I did do the test with the DF wire disconnected. Okay, good. > I did this before the big bunch of rains began, > but if I recall correctly: > > At the battery, I get around 11 volts at medium > RPM and a little over 12 at high RPM. If these are the right numbers, then you're finished. You need a new 30-019 VR. > I don't recall if I checked voltage at D+ with DF connected. The voltage at D+ is the same as that at the battery, but just a bit (.25-.5V) higher. I only suggested testing that because it might have been closer, but the battery one is the one that counts. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~