[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 16 Feb 2005 at 22:09, Keith Park wrote: > What you need to do is cut the pipe just where it enters the 46mm nut into > the heaterbox. Not if you hope to save the muffler. Just weld the pipe to the hex. This will seal the leak and work just fine. Then, in a few years, when the muffler is finally shot, you can cut the muffler off and do as Keith suggested. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~