[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] More on heat exchangers


On Wed, 2005-02-16 at 22:20, Jim Adney wrote:

> 
> There was originally a metal "skid plate" at each lower front corner, and a 
> metal strip along the bottom. These were held in place by 4 metal straps, which 
> have probably been replaced by cable ties after the straps rusted away. The 
> original straps have a special kind of "buckle" which can be reused if you have 
> some kind of metal strip to replace the strap with. I have a number of 
> stainless and titanium (!) straps that I cut from scrap from my previous job, 
> but i don't have any spares of the special buckles. 
> 
Jim, let me see what I have on the junk pile of heater boxes that I
have. I might have some of the "buckles". These heater boxes are in the
junk box because the flap area's are gone.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]