Re: [T3] Sheet metal

[John Jaranson <jaransonT3@comcast.net>]

<x-flowed>
On Feb 16, 2005, at 12:23 AM, Russ Wolfe wrote:

> On Tue, 2005-02-15 at 23:01, David Sanderson wrote:
> > Hi Steve
> >
> > Thanks for the info. You wouldn't happen to have those items #16
> > lying around do you? I'm looking for a drawing with some dimensions
> > or a photo so that I can make some.
> I have one set left. And I don't want to let them go. I may want to
> convert the ghia at sometime. Maybe Jim has some.
Check with the guys at the DDB.  The FI pieces are close enough to be 
used with the dual carbs.  I am sure the DDB guys have left over FI 
tin.

If not I have a set of the 16s that I can loan you for the shipping.

There should also be a dual port equivalent of the 15 that goes on the 
horizontal surface of the cylinder tin.  Not sure why it is not shown, 
unless it is FI only.  I made these piece for Sophy's engine.

Later,
John Jaranson
'66 Square (Sophy)
'71 Fasty (Jane - darkside project in waiting)
various parts.....don't we all.
http://mywebpages.comcast.net/jaransonT3/jaransonT3/
http://mywebpages.comcast.net/jaransonT3/2004Invasion/
http://mywebpages.comcast.net/jaransonT3/notavwclub/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>