[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] FI wiring harness colors?

<x-flowed>Thanks guys for your suggestions. Now I remember about the numbering but that probably won't help me as I can't find the wire. I'm afraid I'm going to need to cut into the wiring harness to find the cut wire and hit it with an OHM meter from the plug.

   Toby Erkson  --  air_cooled_nut@pobox.com
   Two '72 VW Squarebacks, '95 VW Jetta ~ WIP, '81 Gold Wing, '73 Porsche 914
   http://www.icbm.org/
   Portland, Oregon



Keith Park wrote:

All the wires in the FI harness are numbered, small number stamped and inked
in near the end of the wire.  Often this gets cut off or worn off but you
can usually still find them.  It along with the Bentley will tell exactly
what wire it is.  The other thing you can do is an ohmic check to the brain
plug and check the number at that end.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]