[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 2/10/05 9:56:51 AM Eastern Standard Time,
jadney@vwtype3.org writes:
<< Good, I've always wondered if those would be useful here. Is this the size
for
the nominal 1" NPT pipe, or is it the actual diameter of the tool?
Is this something that we can buy cheaply at Harbor Freight? >>
Yes, 1" NPT. I'm not sure about Harbor Freight, as I don't have one of their
catalogs, but if they carry it, then it might be cheap enough to get one from
them. I used one of those 1" internal pipe wrenchs when I changed my type3 oil
breather over to a type1 oil fill/breather on my Notch (remember I've got a
t-1 based engine in it). In fact we just did a similar mod to my son's Roadster
back in mid December, as he wanted to stop popping the plastic cap out of his
to add oil (also a t-1 based engine, but with t-3 cooling). It makes a very
difficult job very easy. : )
Bob 65 Notch S w/ Sunroof
71 Square, now a 2 seat Roadster, pics can be seen at;
http://volksrods.com/forums/index.php?showtopic=2977
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~