[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> I had the same symptoms and the fan was the problem. The fan is held to its > hub with rivets. The rivets had loosened over the years allowing the fan to > wobble around. My solution was to remove the fan, make sure the space > between the fan and hub is comlpletely clean and peen the rivets back down > with a large punch. After checking the assembly for runout I welded the fan > to the hub to prevent the problem from re-occuring. I can't Imagine removing > the fan without removing the muffler. > This could easily be my problem, and you're right, I also don't believe it's possible with the muffler installed; I was only asking in case someone has some magic formula for doing it. Daniel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~