[T3] another parts number question

[David Sanderson <porschedave@rennlist.net>]

<x-flowed>Hi all

I have two pressure plates for my 1500. One has part number 211 141 
025 A and the other 211 141 025 B. The former is an F & S model typ 
KX200 while the other has no manufacturer markings unless the small 
stamped LUK indicates a manufacturer. The former appears identical to 
the one identified in my official type 3 workshop manual.

I understand that the flywheel from a type 3 6 Volt system is 
slightly smaller than the 12 V flywheel. However, the clutch plates 
appear to be the same size. That is, the pressure plate appears to 
fit either of my flywheels. Is this correct?

Thanks again...

Dave
--
David Sanderson
(604) 822 - 4361 or (604) 255 - 4935 voice
(604) 822 - 6842 fax
porschedave@rennlist.net
1977 911S 3.0 L
1965 Sunroof Notch
1966 Notch
http://members.rennlist.com/porschedave/
http://www3.telus.net/SUDAMA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>