[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Dec 2005 at 0:23, type3weezer@comcast.net wrote: > Any body here ever do a rebuild on a single circuit Master cylinder? I > picked up a rebuild kit and am trying to decide if I should do it or > hand it over to my mechanic. I have the Bentley so hopefully it would > be straight foward. It should be simple if you have some idea of what you're trying to do and have a brake cylinder hone. Sometimes there can be a problem with not getting the exact correct parts, so you have to be careful with things like piston length. Mainly it's a matter of getting a good finish on the cylinder bore and getting everything reasonably clean when you reassemble it. I can do it for you. Most mechanics today have never done one and don't want any part of it, but it's not rocket science. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~