[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] oil press. gauge sender


On 5 Dec 2005 at 17:58, David Yaghoubian wrote:

> A 90 deg. elbow to a tee sounds like it would do the trick. Time to 
> take some measurements.

The OE banjo fitting brings the whole thing out from under the air 
cleaner, so from there you can do just about anything you want. You 
have to watch out for the connecting rod to the left carb, however.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]