[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Aug 2005 at 11:06, Russ Wolfe wrote: > I have looked through every manual I have here, and the only time they > reference the 225mm dimension, is with the dual circuit brakes. And it > is for just the reason Dave mentions. Yes, that plate is part of the > body, but the master cylinder bolts to the frame. > As for the length of the dual circuit pushrod, the dimension are given > as 149.5 +/- 0.5mm, so I don't think that is a misprint. I do think > Jim's pushrod is off at 153mm. I dug up 2 pushrods that were part of pedal assys. lying in my basement. I really can't vouch for the history of either, but it seem like more than a coincidence that they were both within 0.5mm of each other. I'll go down later and see if there's another one there that I can also compare. I'd go pull one off a working car, but I'm not THAT motivated. ;-) Doesn't anyone else have some random late model pedal assys lying around? -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~