Re: [T3] Terryville show

[Jens Vagelpohl <jens@type4.org>]

<x-flowed>
On 24 Aug 2005, at 04:43, BOB2TYPE3S@aol.com wrote:
> Keith, they made several different 4 "inlet" t-4 mufflers. The real  
> question
> should be where does your tail pipe exit the muffler? On mine, it's  
> right of
> center, angling back to the left, where the damper/tail pipe runs  
> parallel to
> the muffler face, and exits at about the stock t-3 location. Is  
> yours like this
> this?

The muffler you describe would have been used on 411/412 sedans.  
411/412 wagon mufflers (and later on Type 2s with Type 4 engines) had  
the outlet pipe mount on the side of the muffler, on the passenger side.

Little bit of trivia: Most of the outlet pipes that are on offer for  
the side outlet style mufflers are bus outlet pipes. While the  
original 411/412 pipe is a simple 90 degree angle job the bus pipe is  
longer and actually angles slightly towards the front before that 90  
degree bend.

jens

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>