[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2005-04-22 at 21:19, David Martinez wrote: > Bill > > See I don't think that is the case here because the type of pump cover was > one that the oil entered on one side to the oil pump cover, went through the > spin on filter and back out to the oil pump. The case is not tapped anywhere > out side. And I really don't want to pull the engine again unless I have to > as a last resort. > Thanks bill > You wouldn't have to pull the engine to pull the pump. Just the fan shroud. Just a thought. Check the oil pressure relief valves in the case. Is one of them possibly stuck open, or missing?? -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~