Re: [T3] fender fit: a question

["Jason Weigel" <notchboy@comcast.net>]

<x-flowed>All of these should be flush with one another. Maybe you ran into some 
problems using the rockers you used? If memory serves me they were from a 
square or fasty? These rockers were slightly different from the notch ones. 
Most differance occuring in the inner cab side profile and the notch using 
the 3 bolt hinges through out production. Square and Fasy rockers are the 
same from 66 to 73. ??

jason

----- Original Message ----- 
From: "David Sanderson" <porschedave@rennlist.net>
To: "type3" <type3@vwtype3.org>
Sent: Sunday, April 03, 2005 8:01 PM
Subject: [T3] fender fit: a question


> Greetings
>
> Well, as I indicated last week we have placed the Notch shell on the pan 
> and we're pretty pumped - it seems almost like a car. Of course, now comes 
> the hard work, making the bits from 3 or more cars fit like they belonged 
> together - ya right! I was looking over the photos on Samba, looking 
> especially for the fit of the doors. Can someone tell me if there is 
> supposed to be a cover plate on the rocker underneath the door. That is, 
> when the front and rear fenders are bolted on they are not flush with the 
> rocker but rather are high by at least the thickness of the skin. And when 
> the door is mounted if it is flush with the fenders then it too will be 
> proud of the rocker. Or should this whole thing end up flush with the 
> rocker.
>
> By the way, on the Samba was a photo of Tim Hesse's Notch. Does anyone 
> know him and his e-mail? I would like to ask him a couple of questions.
>
> Dave
>
> --
> David Sanderson
> (604) 822 - 4361 or (604) 255 - 4935 voice
> (604) 822 - 6842 fax
> porschedave@rennlist.net
> 1977 911S 3.0 L
> 1965 Sunroof Notch
> 1966 Notch
> http://members.rennlist.com/porschedave/
> http://www3.telus.net/SUDAMA
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


</x-flowed>