[T3] Z-bars. was: leaky transmission. [ strange one.. ]

[Parker-Durost <ginpete@xprt.net>]

<x-flowed> > I just scan the page in my T-3 parts book and put it up on my web site.
> I think his set up is shown as item 2.
>
> http://classicvw.org/gallery/just_stuff/axles

And here's the z-bar in all its glory! John J., add an extra "51" bumper 
to pre-load (maybe it goes under the tab, can't remember now).  The 
bushing I had to rebuild is 38 which goes into linkage arm 37.  I used a 
1/8" (3.2mm) thick sheet of EPDM sheet folded around the metal core 
bushing.  Still holding out after 10k miles.  I made my own "52" 
replacement to keep the linkage arm from rattling in the tab by just 
slipping piece of hydraulic hose over the rod.  Good luck!

Peter Parker
'66 Square; Phillip
Portland, OR


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Shameless link for search engines: http://listarchive.type3.org ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>