[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
All T3s came with a fiber board material covering the rear trunk area and engine lid. It was tan and made of organic fibers/thisel?sp. The top part you saw was tan and paper-like. It was about 1/2 to a 1/4 in thick. Itwas a insulator and nois dediner all in one. The actual paint on the metal is the same as the car. If you dont have the original mat I described, dyno mat will work good but wont have the same apearance as stock. jason > One of the questions that came up at the bodyshop yesterday was what color > the rear trunk should be. Its obvious that the everything apart from the > floor is body color (in my case, Savannah Beige), but when I got the car the > floor was painted. Should the floor also be beige, with a cover over it, or > should it be some other color/material. I know I need to install new snaps > to hold down a cover, and that there should be a grey material over the > sides of the trunk, but what color do I use as a base? > > Thanks, > Jim ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~