[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
If the discs/drums are off and you protect the bearings from dust and grit if still fitted, sanding or power wire brush will give immediate good braking and keep the linings free of rust dust. If it's just a light layer, it won't do any harm, but expect indifferent braking for the first few applications. In the light of discussions about who to send replies to, why did my reply button try to send this direct to Steven rather than the list? I know it's Steven's reply I've responded to, but it usually puts To as type3 list. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Steven Ayres" <comwest@att.net> To: <type3@vwtype3.org> Sent: Wednesday, September 01, 2004 12:50 AM Subject: Re: [T3] Rusty Brakes > Jeff=> Anything special I should do to the drums and disk to > => remove the coating of rust on them from sitting for too many > => years? > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~