[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I have some good pictures of this at the address below. It's easy once you know what you are doing. I learned from this list! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Rich & Nicole (Daughter), Orange County, CA 70/71 SquareBack MT FI http://community.webshots.com/user/schlegelr ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Russ Wolfe [mailto:russw@classicvw.org] Subject: Re: [T3] Fuel injector hoses It is not necessary to replace the injectors. Just remove the injectors and with a grinder or dremel tool, carefully cut through the crimped ferrel that holds the hose, and the hose will come off. Just dont cut into the hose barb that is underneath. You can then replace the hose and tighten with a hose clamp. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~