[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 16 Nov 2004 at 16:54, Constantino Tobio wrote: > As for the pressure sensor itself, I think a vacuum pump and a > multimeter will do the trick, but I don't have the specs in front of > me. The only thing you can really test in the pressure sensor is that it holds vacuum (suck on it ;-p ), and measure the coil resistances. One coil is about 90 ohms while the other is about 300 ohms. Neither should show any continuity to ground. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~