Re: [T3] Wont idle.....still

["Jason Weigel" <notchboy@comcast.net>]

<x-flowed>No, you are in good company. I too like to swap out things instead of 
finding the actual cause. First thing I thought it was was the idle cut off. 
It works.

Im down to the car starting and reving fine. Timming on, gettin plenty of 
juce. The manifold is in great shape baring that its heat rise is plugged. 
No obvious holes or cracks. Remember I just restored this manifold so I got 
pretty intimate with it. ;)

perplexed!

jason
----- Original Message ----- 
From: "The Canadian" <cndt3@shaw.ca>
To: <type3@vwtype3.org>
Sent: Sunday, November 07, 2004 4:28 PM
Subject: Re: [T3] Wont idle.....still


> Sounds like the electromagnetic cut-off valve but it wouldn't persist with
> different carbs.  Unless of course you used the same valve on both carbs.
> You can also do what I always do:  Swap in a different distributor!  (Yes
> everybody I know that is how I got myself into trouble but I'm betting 
> that
> Jason is smarter than I am!)
>
> Good luck,
> Andre
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


</x-flowed>