[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Nov 2004 at 11:22, john r wrote: > I know this needs to be done. I know there is a 12 point (torx like) driver > for the attachement to the tranny. It's an 8mm metric spline driver. The DIN designation is an 8mm XZN driver, but I've never seen this used in US stores. Be sure to clean out the sockets in the bolts carefully first. You'll probably have to tap the driver in there to get enough purchase to not damage the driver. And you must TORQUE those bolts to spec when you put them back in. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~