[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
It's a 8-mm 12-point driver. NOT a Torx pattern. Before you use the driver, clean the crud out of the socket of each bolt with a finishing nail or something. You don't want to strip them. Mark Fuhriman '69 Fastback -----Original Message----- From: john r <vwfasty@yahoo.com> Sent: Nov 4, 2004 11:22 AM To: type3@vwtype3.org Subject: [T3] Taking trans-axel's off for towing on dolly I know this needs to be done. I know there is a 12 point (torx like) driver for the attachement to the tranny. The question is, does that rachet driver have a specific size. I need to get one. I could not give napa enough inforamtion to see if they had them. Any other tips, necesary for doing this would be nice. Thanks much, -John 69 fastback x 2 more no after this weekend. :( __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~