[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Don't forget to test it before putting every little screw and washer back on, I remember Russ saying to put a rubber band underneath the two long screws to help hold them in place while you screw the nuts back on.Don't forget to re-install a new foam piece on the oil cooler, and don't forget to put any spacer/washer that might have been there underneath the cooler back in place. Oh yeah also make sure you have the right oil cooler/engine combination as well as the seals to go with them. Good Luck Thank You David 67 Baltic Blue Fastback ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org