[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2004-03-19 at 19:25, Jim Adney wrote: > On 19 Mar 2004 at 17:57, Russ Wolfe wrote: > > > I have purchased some material to make the phenolic gaskets between the > > carb and the manifold. I had to buy a fairly large sheet of material, > > and once I am set up on the mill at work, I can make a bunch of them > > pretty easy. > > Too bad you didn't mention this earlier. We use lots of phenolic here and > there's always scrap avalable. What thickness are you using? Could you use any > more? Bob said his were 8mm thick with the gaskets. So I got 1/4" Garloc. It is good up to 285F. Yeah, I could probably use more if you have some. I will probably screw up a few. ;=) I will probably start with 3"x3" pieces for the mill. -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org