[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I faked a gauge using an air pressure gauge from a compressor. I think mine reads up to 50 PSI. I just used fuel line, hose clamps and some air compressor bits to make it all fit together. From here you just take off the bit of fuel line on the T fitting by the injectors, clamp it down and test away. Andre > Hey folks, I 've been looking at fuel pressure guages, and they all > have this 1/4 inch-ish o.d., long polyvinyl tube coming out the side > of them. The Bentley picture doesn't show anything like that, and I'm > not sure what function this performs, where it would go when testing, > etc., if the main black tube is supposed to go over the test port. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org