[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim I think you are correct. There are two different part numbers for the vent wing seals which would lead me to believe that the glass is also different. Douglas R. Gray -----Original Message----- From: Jim Adney [mailto:jadney@vwtype3.org] Sent: Monday, June 14, 2004 11:40 AM To: type3@vwtype3.org Subject: RE: [T3] Vent Wing Window Replacement On 14 Jun 2004 at 8:14, gray, douglas wrote: > Assuming the frame is unbent, the glass is the same as a Type 1. Also, since > it is flat, just removed the one from your driver's side and have a glass > shop use it as a template and cut you one. Usually glass shops will have the > dimensions so check with them before you remove your driver's side. I thought the beetle one was different. I went thru a process many years ago, trying to get mine replaced. The story that I kept getting from the glass people was that VW kept giving them a beetle part. I'll check tonight to see whether this glass has a 311 part #. I'd be reluctant to remove a good glass from the frame. I think it can be difficult to get it back in correctly AND tight. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org