Re: [T3] Distributor rebuild

[Parker-Durost <ginpete@xprt.net>]

<x-flowed> >Clamp the drive dog teeth downward into the top of a vise, with the 
LONG/WIDE
>space away from you. Place the distributor, with all the 
spacers/washers in
>place, in from above. Turn the dist shaft until the notch in the top (the
>indexing notch for the rotor) is facing away from you and slightly to the
>right.

This is what Elfrink shows too. But my 311 905 205G shaft/dog won't, 
it's 90 deg. off. If I do as above, the rotor slot faces toward me and 
to the right.  We'll see what happens when I install it.  If the vac. 
can fits and it runs, I'll figure out a way to make sure #3 is retarded 
3 deg.  Thanks all.

Peter Parker
'66 Square; Phillip
Portland, OR


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>