[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Mon, 2004-06-07 at 23:01, John Jaranson wrote: > > I have photos of the differences in the two linkages on my website > (which is in serious need of an update). All the differences are in > the control rods. The bellcrank is a common part. > > The single port control rods have an off-set bend in the horizontal > link and a longer leg on the vertical link. > > The dual port control rods have a straight horizontal link and a very > short leg on the vertical link. > > The pictures are on the page below: > > http://mywebpages.comcast.net/jaransonT3/jaransonT3/LatestNews.html > > And here are the 2 linkages compared side by side. Don't forget that the head washers unde the linkage on the single port are about twice the thickness of regular head bolt washers. This can be seen in the picture also. http://classicvw.org/gallery/my_misc/thermolink1 -- Russ Wolfe '71 FB AT '66 FB MT '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org