[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 6 Jun 2004 at 12:38, Aaron Kunkle wrote: > I let my 72 squareback sit for a little too long and when I finally > started there were several fuel line leaks in the engine compartment. > One was easy to replace but there are 2 more leaks in the little (about > 1 inch) pieces of hose connecting the injector to what looks like a tee > fitting. The line looks crimped onto the injector... can that piece be > replaced or is it a permanent part of the injector? It can, and should, be replaced. All you have to do is cut thru the crimp ferrule while being careful not to cut into the hose nipple underneath. I use a hacksaw, but I think this would actually be easy with a grinding wheel. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org