[T3] timing

["joshua brooks" <joshua_bro@msn.com>]

I use a non stock distributor in my car. To figure out the timing I used a 
fabric tape measure to measure the circumference of the timing scale area. 
Divide by 12 to get a distance equal to 30 degrees. Make a mark this 
distance advaced from top dead center and set your total mechanical advance 
(vacuum hoses disconected) and you're timing is probably at a safe efficient 
setting.

Josh Brooks 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org