[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 10 Feb 2004 at 22:52, David V.N. wrote: > Well the 2110 is installed.New harness,new MPS,new comp,et al. > Damn thing wouldn't idle!Lean,lean ,lean.Checked for=low pressure?, > vacuum leaks?,injectors bad?,etc.,etc. > No to all. > Guess what? > The MPS adjustment instructions at > http://members.rennlist.com/pbanders/manifold_pressure_sensor.htm > worked perfectly! 32psi on the ring. If you are just using the stock FI components, I estimate that you will need a fuel pressure of 38-39 psi to make this work right. That can be changed by a lot of factors, but start there. If you've changed things, like the injectors, MPS, etc, then you're on your own, unless you can tell us specific facts about the new parts vs the old ones. . -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org