[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Tue, 2004-08-17 at 21:24, phil cain wrote: > O.K. here we go, 2.000in long, outside is 1.370, > 1.300in to the step, cut down to 1.140in. outside is > 1.370in, hole in the center is .975in, thickness of > the pipe is .200inches both ends and the step is > beveled. I'm confused, I hope this helps. Phil > Thanks Phil. That is what I needed. It confirms some of the dimensions I had already figured out. The inside diameter sounds pretty restrictive, so I think I will open it out. It looks like their is enough wall thickness to do that. I will let you know how they come out. -- Russ Wolfe '71 FB AT '66 FB MT '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~