[T3] Voltage Drop Question

[John Jaranson <jaransonT3@comcast.net>]

<x-flowed>Fired Sophy tonite!!!  First time she has run in a few months and the 
first time with 12V power.  Most of the lights work and the clock and 
stuff....

but, i can't get the wipers to work with the voltage drop wired in.  I 
suspect I have it in the wrong spot but don't want to screw something 
up.  Here is the low down...

The wipers work if I hook 6V power to them direct without the voltage 
drop in the system.  They also work (really fast) if I hook 12V to them 
direct without the voltage drop.  Problem comes when I put the voltage 
drop in the circuit between my power source and the wiring for the 
wipers.  I get nothing.  I checked the voltage drop with my multimeter 
and it has continuity across it.  It doesnt register any resistance.  
Shouldn't it?  If so how much?  My multimeter resistance scale is in 
1000 of ohms.

Obviously electrical theory is not my strong suit.  Help!!!  Need to 
get her ready for the run to Hershey this week and I still need to 
finish wet sanding and buffing her and dong the final assembly.

Later,
John Jaranson
'66 Square (Sophy)
'71 Fasty (Jane - darkside project in waiting)
various parts.....don't we all.
http://mywebpages.comcast.net/jaransonT3/jaransonT3/
http://mywebpages.comcast.net/jaransonT3/2004Invasion/
http://mywebpages.comcast.net/jaransonT3/notavwclub/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Shameless link for search engines: http://listarchive.type3.org ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>